brp_UI_PulseRgbLed()

brp_errcode brp_UI_PulseRgbLed	(	brp_protocol	protocol,
		unsigned	LedBitMask,
		unsigned	RgbColor1,
		unsigned	RgbColor2,
		unsigned	TransitionTime,
		unsigned	Period
	)

This command starts to pulse a single LED or a group of multiple LEDs continuously by performing smooth sine-wave approximated transitions between 2 RGB colors.

To stop the pulsing, call the command UI.SetRgbLed.

This command gives you direct control of the reader's LEDs. It competes with the commandUI.Enable , which can be used to switch LEDs via Virtual LED port definitions (VLEDs)._UI.Enable_ operates on a higher abstraction level. Don't mix the 2 commands as this may result in inconsistent behavior.

Parameters

[in]	protocol	used to execute the command
[in]	LedBitMask	A bitmask containing all LEDs you want to switch.
[in]	RgbColor1	The first RGB color of the desired pulse signal (0x00RRGGBB).
[in]	RgbColor2	The second RGB color of the desired pulse signal (0x00RRGGBB).
[in]	TransitionTime	The time for the fading transition to activate the first RGB color in ms. If a color is currently activated, this is also the time to deactivate this color first. For an immediate color activation, choose the value 0.
[in]	Period	The period of the pulse signal in ms. This is the time to transition from the first RGB color to the second and back to the first.