BALTECH SDK wrapper functions reference

§ brp_Iso15_StayQuiet()

brp_errcode brp_Iso15_StayQuiet ( brp_Iso15_StayQuiet_t  params)

This command puts a label into the quiet-state.

This command shall always be executed in addressed mode (see the brp_Iso15_SetMode() command). After executing this command, the label will not response to any brp_Iso15_GetUIDList() command until its state machine is reset (either by a physical HF-reset (i.e. switching off the field of the antenna or taking the label out of the field) or by executing the commands brp_Iso15_ResetToReady() or brp_Iso15_SetMode() (using selected mode).

Parameters
[in]paramsStruct with the following fields:
  • protocol used to execute the command