Protocols / AccessConditionBitsAlt / BrpOverOsdpLimited
Value
Specifies the access rights when running BRP commands over
OSDP, at which OSDP is configured to run in secure mode and the
secure connection has not yet been established.
Properties
- Value ID: 0x01E1/0x38
- Default value: SecurityReset
Format
| Name | Type/Size | Description | |
|---|---|---|---|
| HostSecurityAccessConditionBits | Bit mask (32 bits) | Every Feature in this list can be disabled by not setting the corresponding bit. | |
| RFU | Integer (bit mask area 0xE0000000) | Zero padding | |
| EthernetAccess | Boolean (bit 0x10000000) | Provide Access to Ethernet BRP Commands | |
| AutoreadAccess | Boolean (bit 0x08000000) | Has to be cleared to deny control autoread task | |
| CryptoAccess | Boolean (bit 0x04000000) | Has to be cleared to deny allow access to the encryption unit | |
| Bf2Upload | Boolean (bit 0x02000000) | Has to be cleared to deny allow to upload firmware | |
| ExtendedAccess | Boolean (bit 0x01000000) | Has to be cleared to deny allow access to the extended reader partition | |
| FlashFileSystemWrite | Boolean (bit 0x00800000) | Has to be cleared to deny write access to flash file system | |
| FlashFileSystemRead | Boolean (bit 0x00400000) | Has to be cleared to deny read access to flash file system | |
| RtcWrite | Boolean (bit 0x00200000) | Has to be cleared to deny write access to RTC | |
| VhlExchangeapdu | Boolean (bit 0x00100000) | Has to be cleared to deny running VHL APDU Exchange | |
| VhlFormat | Boolean (bit 0x00080000) | Has to be cleared to deny formattings cards via VHL | |
| VhlWrite | Boolean (bit 0x00040000) | Has to be cleared to deny writing cards via VHL | |
| VhlRead | Boolean (bit 0x00020000) | Has to be cleared to deny reading cards via VHL | |
| VhlSelect | Boolean (bit 0x00010000) | Has to be cleared to deny detection of cards via VHL | |
| ExtSamAccess | Boolean (bit 0x00008000) | Has to be cleared to deny access to SAM over 7816-3 commands ( Iso78 command group ) | |
| HfLowlevelAccess | Boolean (bit 0x00004000) | Has to be cleared to deny allow to access HF via low level commands | |
| GuiAccess | Boolean (bit 0x00002000) | Has to be cleared to deny access to keypad/lcd | |
| IoPortWrite | Boolean (bit 0x00001000) | Has to be cleared to deny write access to io ports | |
| IoPortRead | Boolean (bit 0x00000800) | Has to be cleared to deny read access to io ports | |
| ConfigReset | Boolean (bit 0x00000400) | Has to be cleared to deny reset configuration keys/while configuration. | |
| ConfigWrite | Boolean (bit 0x00000200) | Has to be cleared to deny write access to configuration keys/values. | |
| ConfigRead | Boolean (bit 0x00000100) | Has to be cleared to deny read access to configuration keys/values | |
| SysReset | Boolean (bit 0x00000080) | Has to be cleared to deny allow reboot/powerdown of system | |
| SetAccessConditionMask2 | Boolean (bit 0x00000040) | Has to be cleared to deny set ac 2 | |
| SetAccessConditionMask1 | Boolean (bit 0x00000020) | Has to be cleared to deny set ac 1 | |
| SetAccessConditionMask0 | Boolean (bit 0x00000010) | Has to be cleared to deny set ac 0 | |
| SetKey3 | Boolean (bit 0x00000008) | Has to be cleared to deny set security key 3 | |
| SetKey2 | Boolean (bit 0x00000004) | Has to be cleared to deny set security key 2 | |
| SetKey1 | Boolean (bit 0x00000002) | Has to be cleared to deny set security key 1 | |
| FactoryReset | Boolean (bit 0x00000001) | Has to be cleared to deny resetting system to factory settings | |