Reference Manual


Protocols / LowLevelIoPorts / PhysicalPinMap Value

If this protocol is activated every physical pin of the 3 pins of the second channel is assigned to a virtual Port. This assignment can be changed by setting an entry of this list to a specific virtual Port. The list entries are assigned to this physical pins (in order):
  1. TX os RS-232/UART when configured for RawSerial
  2. Direction pin when configuration for a RS485 based protocol like OSDP
  3. RX os RS-232/UART when configured for RawSerial

Properties

Format

Name Type/Size Description
- Array (until end of frame) -
PhysicalPin Enumeration (8 bits) I/O pins of the reader that can be controlled by the user.
Values:
  • GreenLed (0x00)
    Enable/disable/toggle the green LED (if available).
  • RedLed (0x01)
    Enable/disable/toggle the red LED (if available).
  • Beeper (0x02)
    Enable/disable/toggle the beeper (if available).
  • Relay (0x03)
    Enable/disable/toggle the relay (if available).
  • Input0 (0x04)
    Retrieve the state of the custom input 0.
  • Input1 (0x05)
    Retrieve the state of the custom input 1.
  • BlueLed (0x06)
    Enable/disable/toggle the blue LED (if available).
  • TamperAlarm (0x07)
    Retrieve the state of the tamper alarm.
  • Gpio0 (0x08)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio1 (0x09)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio2 (0x0A)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio3 (0x0B)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio4 (0x0C)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio5 (0x0D)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio6 (0x0E)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio7 (0x0F)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • CustomVled0 (0x40)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled1 (0x41)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled2 (0x42)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled3 (0x43)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled4 (0x44)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled5 (0x45)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled6 (0x46)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled7 (0x47)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled8 (0x48)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled9 (0x49)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled10 (0x4A)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled11 (0x4B)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled12 (0x4C)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled13 (0x4D)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled14 (0x4E)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled15 (0x4F)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.