Reference Manual


BaltechScript / ToggleInverted Protocol Frame

Set IoPort to low, wait Delay/10 seconds. Then set IoPort to high and wait Delay/10 seconds again. Repeat this RepeatCount times. This is exactly the inverse behaviour of Toggle and is mainly used to ensure that the IoPort is set to high after finishing toggling.

See also Enable, Disable or Toggle.

Properties

Format

Name Type/Size Description
InvertedToggledIoPort Enumeration (8 bits) I/O pins of the reader that can be controlled by the user.
Values:
  • GreenLed (0x00)
    Enable/disable/toggle the green LED (if available).
  • RedLed (0x01)
    Enable/disable/toggle the red LED (if available).
  • Beeper (0x02)
    Enable/disable/toggle the beeper (if available).
  • Relay (0x03)
    Enable/disable/toggle the relay (if available).
  • Input0 (0x04)
    Retrieve the state of the custom input 0.
  • Input1 (0x05)
    Retrieve the state of the custom input 1.
  • BlueLed (0x06)
    Enable/disable/toggle the blue LED (if available).
  • TamperAlarm (0x07)
    Retrieve the state of the tamper alarm.
  • Gpio0 (0x08)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio1 (0x09)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio2 (0x0A)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio3 (0x0B)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio4 (0x0C)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio5 (0x0D)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio6 (0x0E)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • Gpio7 (0x0F)
    Refers to a general purpose I/O. The physical pin assigned to this logical I/O port depends on the physical setup of the device.
  • CustomVled0 (0x40)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled1 (0x41)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled2 (0x42)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled3 (0x43)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled4 (0x44)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled5 (0x45)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled6 (0x46)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled7 (0x47)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled8 (0x48)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled9 (0x49)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled10 (0x4A)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled11 (0x4B)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled12 (0x4C)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled13 (0x4D)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled14 (0x4E)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

  • CustomVled15 (0x4F)

    Custom Virtual LED (VLED) port. Allows RGB LEDs to be activated with a user-defined color.

RepeatCount Integer (8 bits) -
Delay Integer (8 bits) -