Reference Manual


VhlCfg / File / MifarePlusProxyimityCheck Value

This value is used by Mifare plus firmware only and specifies an index to the proximity check key. If configuration value is missing no proximity check by the reader will be done. Cards with proximity check enabled do not work without this check.

Properties

Format

Name Type/Size Description
ProxCheckKeyMemoryType Enumeration (8 bits) This value references a key memory type within the reader. VHL detects the security level (SL0..3) of a Mifare classic/plus card automatically and according to the security level the adequate key memories (AES and/or Mifare keys) are chosen. For some key memory types a card in Mifare plus security level 2 (SL2) needs both keys (AES and Mifare): then the configuration value MifarePlusKeyIdxOffset describes an offset of Mifare keys to AES keys (! signed value).
Values:
  • CryptoKey (0x00)
    References keys within the CryptoKey memory.
    Key offset needed: refer to MifarePlusKeyIdxOffset
  • SamKey (0x01)
    References keys within a SAM, only available on SAM based readers: key index from 0x00 to 0x7F, a SAM key contains up to 3 AES keys with different versions or 3 Mifare key pairs (A and B). VHL uses always the first SAM key.
    Key offset needed: see MifarePlusKeyIdxOffset
  • ReaderChipKey (0x02)
    References keys which are stored in reader chip memory: 32 keys (index 0..31) are available. This memory contains only keys for Mifare classic cards (SL1).
  • VhlKey (0x03)
    References keys which are defined in respective VHL files:
    AES keys in MifarePlusAesKeyList
    Mifare keys in MifareKeyList
ProxCheckKeyIdx Integer (8 bits) Key entry of the proximity check MAC key.